LD Systems

LD SAT262G2 - 2 x 6.5" + 1 " PASSIVE INSTALL SPEAKER

Installers only. POA.

Sku:
LDS-SAT262-G2
Weight:
11.20 KGS
Width:
0.72 (cm)
Height:
0.29 (cm)
Depth:
0.72 (cm)

With its slim, streamlined design, the LD Systems SAT 262 G2 is excellently suited for permanent installation and discreet integration in virtually any setting. It features two 6.5" custom woofers and a 1” Celestion compression driver connected to a rotating CD horn with 80° x 60° dispersion. This makes the passive 2-way speaker ideal for both vertical and horizontal use.

The SAT 262 G2 attains a maximum sound-level pressure of 116 dB over a frequency response curve of 65–19 kHz with a permanent load capacity of 180 watts. The reflex casing made of 12 mm MDF has four M8 mounting holes. The inputs are a speakON-compatible socket and a terminal block, while an additional terminal block serves as an output for convenient parallel connection.

Special wall holders are available as an accessory to facilitate wall mounting. The SAT 262 G2 is available in black (Art. No. LDSAT262G2) or white textured finish (Art. No. LDSAT262G2W).

  • Passive 2-way bass-reflex installation speaker
  • 180 W permanent load capacity
  • 116 dB maximum sound-level pressure
  • 2 x 6.5" custom woofer and a 1” Celestion tweeter driver
  • Rotating CD horn with 80° x 60° dispersion
  • For vertical or horizontal use
  • speakON-compatible and terminal block input
  • 4 x M8 mounting holes
  • Shock-resistant front grille for optimum speaker protection
  • Extensive range of smart accessories for installation
  • Available in black or white
Product type Installation Loudspeakers
Type Wall-mounted Loudspeaker
Low/mid Woofer dimensions 2 x 6.5 "
Woofer dimensions (mm) 2 x 165.1 mm
Woofer magnet Ferrite
Woofer brand Custom-made
Woofer voice coil (mm) 38.1 mm
Horn CD Horn
HF driver dimensions 1 "
HF driver dimention (mm) 25.4 mm
HF driver magnet Ferrite
HF driver brand Celestion
HF driver voice coil 1 "
HF driver voice coil (mm) 25.4 mm
Dispersion (H x V) 80 x 60 °
Load rating (RMS) 180 W
Peak power 360 W
Frequency response 65 - 19000
SPL (1W/1m) 93 dB
Max. SPL 116 dB
Impedance 8 Ohm(s)
Protection circuits HF Driver
Loudspeaker inputs 2
Speaker input connections Speakon compatible
Speaker input connections Terminal block
Loudspeaker outputs 1
Speaker output connections Terminal block
Speakers per amplifier channel (DSP44/45K) 4
Cabinet material 12 mm MDF
Cabinet surface texture paint
Cabinet colour Black
Cabinet construction Bass Reflex
Width 200 mm
Height 630 mm
Depth 205 mm
Weight 9,8 kg