Those who do not place their studio monitors on a table surface, but use dedicated stands and mounts for monitoring in their own studio, are already doing a lot of things correct. Nevertheless, studio monitors also generate oscillations and vibrations here, which are transferred to the supporting surface and can thus impair the stereo image of the speakers. Usually, the larger the surface, the more energy transfer takes place. With the SA SM IF 01 absorber pucks, Gravity has a solution ready that can have a big impact with small means.
The Gravity Absorber pucks can be placed freely under a loudspeaker (e.g. studio monitor) and achieve a decoupling of the loudspeaker cabinet and the installation surface due to their silica gel surface. This significantly reduces vibrations and oscillations and makes the stereo image more precise by reducing acoustic smearing and discolouration.
The load capacity is 36 kg when using four Gravity SASMIF01 absorber pucks, which means that most speakers on the market can be used without any problems.
- Infinitely variable height adjustment
- Tilt angle up to +/- 15°
- 360° rotatable
- EVA padded bearing surface
- Anti-tip for the speaker
| Product type | Stands and Tripods |
| Type | Speaker Stands |
| Tubing material | Steel |
| Tubing colour | Black |
| Tubing surface | Powder-coated |
| Min height | 263 mm |
| Max height | 358 mm |
| Tilt angle | +/- 15 ° |
| Bearing surface | 240 x 250 mm, EVA padded |
| Height adjustment | Adjusting screw |
| Base material | Steel |
| Base edge length | 250 mm |
| Max. load | 25 kg |
| Interchangeable rings | 1 x 20 mm, 1 x 30 mm |
| Black ring pack included | Yes |
| Weight | 4,1 kg |
