Palmer

PALMER PB 20 - PRESS PATCH BOX 20-CHANNEL

RRP A$5,292.94
A$4,499.00
Sku:
PAL-PPB20
Upc:
4049521049545
Weight:
9.67 KGS
Width:
0.33 (cm)
Height:
0.18 (cm)
Depth:
0.53 (cm)

"

A press patch box is a special audio signal splitter, which is developed for the specific requirements of a press conference. Via separate inputs, you can connect either a microphone or a line signal (mixer output).

Also available as a stereo version (PPB20S)

A high-quality input amplifier with balanced earth-free input allows for a level adjustment over a wide range. 20 transformer-balanced XLR/m jacks with individual driver circuits in pairs are available as outputs for video cameras or other sound recording devices.

The nominal output level is +4 dBu at 600 ohms. In addition, channels 19 and 20 are equipped with TRS phone jacks for balanced or unbalanced signals and with RCA sockets (-10 dBu nominal level).

If more than 20 outputs are required, further PPB20 units can be cascaded via a BUS IN/OUT socket on the rear panel. A 10-fold LED chain and an adjustable headphone amplifier are used for signal monitoring (display range -40 to +10 dB, 0 dB display corresponds to +4 dBu output).

The PPB20 has a built-in shielded power pack. An additional DC input allows for battery operation or using an emergency power supply. PW4 is a suitable emergency power supply for two PPB20.

""

  • Signal distributor with 20 outputs
  • Isolated transformer-balanced XLR inputs for microphone and line level signals
  • High-quality input amplifier with gain control and +20 dB switch
  • 10 LEDs for level display from -40 to +10 dB
  • 20 transformer-balanced XLR outputs with paired driver circuitry and individual ground lift switches on the rear
  • 2 additional 6.35mm stereo jacks and RCA outputs
  • Nominal output Level +4 dBu/600 Ohms, jack and RCA outputs -10 dBu
  • Adjustable 6.35 mm headphone output
  • Summed input and cascaded output
  • Integrated shielded power supply
  • DC input for emergency power supply

""

Product type Splitters
Type mic & line split
Split type 1 in 20
Channels 1
Inputs 1
Input connectors XLR
Max. input level Mic: 0 dBu, Line: +20 dB
Adjustable input Yes
Number of split-outputs per canal 20
Max. output level + 20 dB
Output connectors 6.3 mm jack
Output connectors RCA
Output connectors XLR
Adjustable output no
Transformer isolated outputs Yes
Controls attenuator
Controls ground lift
Controls input gain
Controls mic/line switch
Controls phones level
Indicators input level
Indicators Power
Operating voltage integrated (115 / 230 V)
Cabinet material sheet steel
Cabinet surface Powder coated
Width 480 mm
Width 19 ""
Depth 200 mm
Height 135 mm
Height 3 U
Weight 9.09 kg

"