LD Systems

LD ICOA 15 ACTIVE BLACK (EACH)

RRP A$998.82
A$849.00
Sku:
LDS-ICOA15A
Upc:
4049521417139
Weight:
28.50 KGS
Width:
0.52 (cm)
Height:
0.84 (cm)
Depth:
0.52 (cm)

This full-range loudspeaker impresses with its outstanding sound, even at low frequencies. The ICOA 15 A by LD Systems is a genuine all-rounder that offers unparalleled features for its class. Its coaxial design, rotating, BEM-optimised CD horn and extensive and precisely calibrated DynX DSP presets make this powered 15" loudspeaker exceptionally flexible.

The outstanding bass reproduction from the horn-loaded woofer makes the LD ICOA 15 A the ideal choice for musicians, bands, entertainers and dance schools. It also allows DJs to play sets without the need for a subwoofer. Deployed vertically, the speaker impresses as a satellite; horizontally, it's excellent in suspended systems or as a floor monitor. The efficient class-D power amplifier delivers 128 dB max. SPL and 1200 W peak performance.

Drawing on DynX DSP technology by LD Systems, the speaker delivers perfect performance with maximum clarity and power under all conditions. 4 presets, a 3-band EQ and a delay function facilitate optimal adjustment of the sound to the venue conditions. The 2 line/mic input channels with individual gain controllers, plus mono mix output, allow a variety of signal sources to be connected.

Thanks to its shock-resistant front grille and ideal 55° tilt angle, the LD ICOA 15 A is also outstanding as a floor monitor. Placed vertically, the 36 mm dual tilt stand attachment offers the choice of a 0° or 5° tilt angle for optimally adapting the system to the local acoustic environment.

Extensive and smart accessories for installation and transport are optionally available. 4 aluminium handles with an ergonomic rubber surface provide optimal grip when carrying the speaker.

  • A genuine all-rounder for full-range, satellite and monitor applications
  • 128 dB max. SPL and 1200 W peak power
  • Vertical and horizontal use thanks to coaxial design with rotating, BEM-optimised CD horn (Patent pending)
  • Horn-loaded woofer
  • DynX DSP with 4 presets, 3-band EQ and delay function
  • 2 line/mic input channels with individual gain controllers plus mono mix output; Bluetooth® streaming with the BT model
  • 36 mm dual tilt stand attachment with 0° and 5° tilt angle, 55° monitor angle with sturdy stand
  • 6 x M10 flying points
  • Shock-resistant front grille for optimal protection of the speaker
  • 4 aluminium grips with ergonomic, rubber surface
  • Extensive, optionally available accessories for installation and transport
Product typePA loudspeaker
TypePowered
Low/mid Woofer dimensions15 "
Woofer dimensions (mm)381 mm
Woofer magnetFerrite
Woofer brandCustom-made
HornBEM optimized CD Horn
HF driver dimensions1 "
HF driver dimention (mm)25.4 mm
HF driver magnetFerrite
HF driver brandCustom-made
HF driver voice coil1.4 "
HF driver voice coil35 mm
AmplifierClass D
Dispersion (H x V)90° x 50°
System Power (RMS)300 W
Peak power1200 W
Frequency response48 Hz - 20000 Hz
Crossover frequency kHz2 kHz
Max. SPL (Peak)128 dB
Protection circuitsover voltage
Protection circuitsover-current
Protection circuitsthermal overload
Protection circuitsMultiband limiter
Controls2 x gain
ControlsOn / off switch
ControlsRotary/push encoder
IndicatorsLC display
Mic/ line inputs2
Mic-/ Line Input ConnectorsXLR
Mic-/ Line Input Connectors6.3 mm jack Combination sockets (symmetrical)
Line inputs1
Line input connectors3.5 mm TRS
Line outputs1
Line output connectorsXLR
Power supplySMPS
Power consumption150 W
Ambient temperature (in operation)0 - 40 °C
Operating voltage100 V - 240 V AC / 50 - 60 Hz
Relative Humidity< 80 %, not condensing
FuseT4AL 250 V
Cabinet materialPolypropylene
Cabinet constructionBass Reflex
Mounting36mm flange (0°, 5°)
Mounting6 x M10 flying points
Monitor angle55 °
Width416 mm
Height695 mm
Depth415 mm
Weight24.3 kg
Accessories (included)Power cord