LD Systems

LD MAUI 11 G3 SUB WHITE

Installers only. POA.

Sku:
LDS-M11G3SUBW
Upc:
4049521785856
Weight:
22.00 KGS
Width:
0.41 (cm)
Height:
0.50 (cm)
Depth:
0.72 (cm)

Crisper and more powerful bass with additional LD MAUI 11 G3 SUB W subwoofer.

With the MAUI 11 G3 SUB W subwoofer, you extend the cardioid characteristics of our professional column speaker series right into the bass range.

What does this mean?

Simply position the SUB next to your MAUI® 11 G3 W facing the rear direction, switch on the Cardioid preset and you will have a quieter and controlled Low-End on the back while still keeping the punch on the front. Low-End frequencies on the back of the system will be dampened by -15 dB. For extra Bass, keep the SUB in the same direction as your MAUI® 11 G3 W and switch off the Cardioid preset.

Setting up the SUB with your MAUI® 11 G3 W is straight forward and fast. Thanks to its automatic set-up detection system the SUB immediately switches to FOLLOWER mode as long as no column is attached.

Also recommendable is the protection cover and castor board to make transportation easy and keep the SUB as long as possible free of any touring-damage.

The MAUI® 11 G3 SUB W features the same design construction as the MAUI® 11 G3 W subwoofer and will be the perfect addition to get your Low-End in control.

  • Powered 2 x 8" subwoofer with flow-optimised bass-reflex ports
  • 2 x 8" custom-designed woofer with deep bass down to 39 Hz
  • Preset for cardioid subwoofer configuration
  • DynX® DSP (Gen. 2) technology for distortion-free sound at maximum volume
  • Automatic Setup Detection (MAIN / FOLLOWER)
  • Rugged subwoofer housing made out of polyurea-coated birch plywood
  • Shockproof front grille for ultimate speaker protection
  • Two ergonomic handles for easy handling
Product type PA subwoofer
Type Subwoofer
colour White
Max. SPL (Peak) 125 dB
Frequency response (-10dB) 39 Hz - 200 Hz
Weight 20,5 kg
Features DSP-based Signal Processing
Features Bluetooth Audio Streaming
Features Excellent Sound Dispersion
Features Mono/ Stereo Application

Subwoofer

Woofer dimensions 2 x 8 "
Woofer dimensions (mm) 2 x 203 mm
Woofer magnet Ferrite
Woofer brand Custom-made
Woofer voice coil 2 "
Woofer voice coil (mm) 50.8 mm
Cabinet construction Bass Reflex
Housing material 15 mm Multiplex
Cabinet surface Polyurea
Dimensions Subwoofer (W x H x D) 305 x 607 x 403 mm
Subwoofer weight 20.5 kg

Amplifier module (integrated in subwoofer)

Amplifier Class D
System output (RMS) 730 W
System output (Peak) 1460 W
Protection circuits thermal protection
Protection circuits DC protection
Protection circuits Multiband limiter
Protection circuits short circuit
Cooling Convection
Controls Bluetooth
Controls Cardioid On/Off
Controls Power On/Off
Controls Sub level
Controls Main level
Indicators Protect (protection circuit engaged)
Indicators Signal
Indicators Subwoofer Mode
Indicators Cardioid On/Off
Indicators Power
Indicators Bluetooth
Indicators Follower mode
Mains connector IEC power cable (included)
Operating voltage 100 V AC - 120 V AC, 50 - 60 Hz
Operating voltage 220 V AC - 240 V AC, 50-60 Hz
Fuse T 3.15AL / 250 V
Power consumption 300 W
Ambient temperature (operating) 0 - 40 °C
Relative Humidity < 80% (non-condensing)
Line Inputs 2
Line Input Connectors Combo XLR / TRS
Line Outputs 2 x THRU
Line Outputs 1 x Sub OUT
Line Output Connectors XLR male
Number of speaker outputs 1
Loudspeaker Output Connectors Custom-made multipin
Bluetooth Standard A2DP
Bluetooth Audio Decoder AAC
Bluetooth Audio Decoder SBC

DSP characteristics

Bit depth AD/DA converter 24 bit
Sampling frequency 48 kHz