Part of the DQOR® series, the DQOR® SUB 8 D is a powered installation indoor/outdoor subwoofer with an 8" woofer and a 10" passive radiator. With a built in Dante audio connection, it easily connects to any networked audio system and is AES67 compliant for compatibility with thousands of audio devices.
Designed for high performance in a compact form factor, it delivers powerful bass audio with no need for separate amplifier racks.
Uniquely the DQOR® SUB 8 D is the only outdoor rated Dante sub bass loudspeaker available.
The clean and low-profile design ensures the DQOR® SUB 8 D is a sleek addition to any room, combining aesthetics with powerful audio performance. Rated at 190 W RMS and max power of 230 W, it delivers impressive sound quality at up to 108 dB SPL with low frequency extension down to 37 Hz.
The DQOR® SUB 8 D has rubber feet for floor mounting, or it can be easily installed with the optional surface mount bracket, which includes flexible mounting options, holes for clean cable management, locking screws, a safety-locking mechanism, and a hinge mechanism for quick setup.
AC inputs are connected with a 3-pole phoenix contact terminal block with lever push-in connector for reliable and safe connection of the power cables. Terminal block connectors allow for remote standby control.
The DQOR® SUB 8 D can be used in a wide variety of applications both inside and outside including hospitality, retail, entertainment, or corporate settings.
It is available in black or white (RAL9005 & RAL9016).
- 8" Powered Subwoofer with 10" passive radiator
- 190 W RMS subwoofer power
- 2 channel Dante audio connection
- Clean, low-profile design with robust aluminium enclosure
- Optional Surface Mount bracket (wall + ceiling) with hinges for easy installation
- IP55 rated for outdoor use
General
| Directivity | Omnidirectional |
| Peak output power | 230 W |
| RMS output power | 190 W |
| Amp class | Class D |
| SPL (1 W/1 m) | 86 dB |
| Max. SPL peak (sine burst, halfspace/1 m, THD≤10 %) | 110 dB |
| Max. SPL peak (pink noise, halfspace/1 m, CF 4) | 119 dB |
| Crossover frequency | 110 Hz |
| Protection features | Short circuit, Overheating, Overvoltage, Undervoltage, Direct current |
| Colour | Black |
| RAL code | RAL 9005 |
Inputs
| Number of Dante® inputs | 1 |
| Dante® connector type | RJ-45 socket |
Dante®
| Channel configurations | Stereo (2 channels) |
| Max. channels (44.1 kHz/48 kHz) | 2 |
| Sample rate | 48 kHz |
| Bit depth | 24 Bit, 32 Bit |
Signal processing
| AD/DA converter bit depth | 24 Bit |
| AD/DA converter sampling rate | 48 kHz |
| Min. Signal-to-noise ratio (SNR) | 96 dB |
| System latency | 2 ms |
Amplifier
| Sub output power per channel (RMS) | 190 W |
| Sub output power per channel (Peak) | 230 W |
External control
| GPI controllable functions | Standby |
| GPI input connection socket | Terminal block 2 pin / pitch 3.81 mm |
Bass driver
| Size | 8 in |
| Magnet | Ferrite |
| Voice coil | 2.5 in |
| Passive radiator | 10 in |
Mains operation
| Operation voltage | 100 V AC - 240 V AC (±10 %) / 50 - 60 Hz |
| Rated power | 270 W |
| Power consumption in idle mode | 18 W |
| Max. Stand-by power consumption | 2 W |
| Power supply type | Switch mode power supply (SMPS) |
| Inrush current | 2.4 A |
| Mains fuse | T3.15AL/250 V |
| Fuse replacement | Possible from the outside without opening |
Standby
| Auto standby after | 20 min |
| Standby wake up time | 3 s |
Housing
| Design | Closed with passive radiator |
| Chassis material | Die-cast aluminium, Plastic |
| Front grille material | Aluminium |
Cooling
| Cooling system | Convection cooling |
Environmental
| Ambient temperature | -10 - 50 °C |
| Maximum air humidity (non-condensing) | 85 % |
| Safety Class | Class 1 |
Dimensions & weight
| Width | 537.4 mm |
| Height | 304.4 mm |
| Depth | 208.1 mm |
| Weight | 15.2 kg |
