Part of the DQOR® series, the DQOR® SUB 8 A is a powered indoor installation subwoofer with an 8" woofer and a 10" passive radiator. It features two 140 W RMS powered outputs, specifically designed for connecting external full-range loudspeakers. These outputs are fine-tuned by DSP presets to ensure an optimal audio pairing with DQOR® series loudspeakers or any other loudspeaker.
Designed for high performance in a compact form factor, it enables a powerful 2.1 audio system with no need for separate amplifier racks.
The clean and low-profile design ensures the DQOR® SUB 8 A is a sleek addition to any room, combining aesthetics with powerful audio performance. Rated at 250 W RMS, it delivers impressive sound quality at up to 108 dB SPL with low frequency extension down to 37 Hz.
The DQOR® SUB 8 A has rubber feet for floor mounting, or it can be easily installed with the optional surface mount bracket, which includes flexible mounting options, holes for clean cable management, locking screws, a safety-locking mechanism, and a hinge mechanism for quick setup.
Four terminal block connectors allow for balanced stereo input, VCA volume control and remote standby control. Dip switches allow for stereo/mono mode, auto standby mode and DSP preset selection.
The indoor installation subwoofer can be used in a wide variety of applications including hospitality, retail, entertainment or corporate settings.
It is available in two colours: black (RAL9005) and white (RAL9016).
- 8" Powered Subwoofer with 10" passive radiator
- Clean, low-profile design with robust aluminium enclosure
- 250 W RMS subwoofer power
- 2 × 140 W amplifier to drive passive loudspeakers for a 2.1 system
- DSP presets for DQOR® loudspeakers or HPF for any loudspeaker
- Optional Surface Mount bracket (wall + ceiling) with hinges for easy installation
General
| Directivity | Omnidirectional |
| RMS output power | 250 W |
| Amp class | Class D |
| SPL (1 W/1 m) | 86 dB |
| Max. SPL peak (sine burst, halfspace/1 m, THD≤10 %) | 110 dB |
| Max. SPL peak (pink noise, halfspace/1 m, CF 4) | 119 dB |
| Frequency response (-3 dB, rel. Avg) | 43 Hz |
| Frequency response (-10 dB, rel. Avg) | 37 Hz |
| Crossover frequency | 200 Hz |
| Input connector types | Terminal block 4 pin / pitch 5.08 mm |
| Protection features | Soft-Start, Short circuit, Overheating, Overvoltage, Undervoltage, Direct current |
| Colour | White |
| RAL code | RAL 9016 |
Inputs
| Number of line inputs | 2 |
| Line-In connector type | Terminal block 3 pin / pitch 3.81 mm |
Line inputs
| Input impedance | 16 kΩ |
| Nom. Sensitivity (< 1% THD, 1 kHz, max. Gain) | 0 dBu |
| Nom. input clipping (< 1% THD, 1 kHz, unity) | 19 dBu |
| Min. CMRR (0 dB below clip, 1 kHz, unity) | 50 dB |
Outputs
| Output signal type | Loudspeaker |
| Number of speaker outputs | 2 |
| Speaker output connection type | Terminal block 4 pin / pitch 5.08 mm |
| Min. speaker impedance | 4 Ω |
Signal processing
| AD/DA converter bit depth | 24 Bit |
| AD/DA converter sampling rate | 48 kHz |
| Min. Signal-to-noise ratio (SNR) | 96 dB |
| System latency | 2 ms |
Amplifier
| Number of satellite outputs | 2 |
| Satellite output power per channel (RMS) | 25 W |
| Sub output power per channel (RMS) | 125 W |
| Satellite output power per channel (Peak) | 45 W |
| Sub output power per channel (Peak) | 180 W |
| Max. THD+N (SAT out, 0 dBu, Volume Center, 1 kHz, 20 kHz BW) | 0.01 % |
| Max. THD+N (SUB out, 0 dBu, Volume Center, 63 Hz, 20 kHz BW) | 0.02 % |
External control
| Resistance for volume control (VCA) | 10 kΩ |
| VCA input connection socket | Terminal block 3 pin / pitch 3.81 mm |
| GPI controllable functions | Standby |
| GPI input connection socket | Terminal block 2 pin / pitch 3.81 mm |
Bass driver
| Size | 8 in |
| Magnet | Ferrite |
| Voice coil | 2.5 in |
| Passive radiator | 10 in |
Mains operation
| Operation voltage | 100 V AC - 240 V AC (±10 %) / 50 - 60 Hz |
| Rated power | 550 W |
| Power consumption in idle mode | 25 W |
| Max. Stand-by power consumption | 0.5 W |
| Power supply type | Switch mode power supply (SMPS) |
| Inrush current | 2.7 A |
| Mains connector | IEC C14 plug male |
| Mains fuse | T6.3AL / 250 V |
Standby
| Auto standby after | 20 min |
| Standby wake up time | 3 s |
| Wake-up threshold | -54 dBFS |
Housing
| Design | Closed with passive radiator |
| Chassis material | Die-cast aluminium, Plastic |
| Front grille material | Aluminium |
Cooling
| Cooling system | Convection cooling |
Environmental
| Maximum air humidity (non-condensing) | 85 % |
| Safety Class | Class 1 |
Dimensions & weight
| Width | 537.4 mm |
| Height | 304.4 mm |
| Depth | 185.6 mm |
| Weight | 15.2 kg |
