The ADX40 is a Miniaturized condenser microphone designed to hang from an overhead position for applications such as group vocals, choir, theatrical production, and room ambiance.
Having a uniformly controlled Cardioid polar pattern, the ADX40 helps isolate the area or section being miked from other vocals or instruments on stage. The ADX40 is also available in a Hypercardioid polar pattern for tighter pick-up control. With a Wide Frequency range of 40 Hz – 20 kHz, the ADX40 provides natural sound with an exceptional sound response.
The ADX40 miniature hanging condenser microphone is supplied with an attached 30 foot shielded cable, external windscreen, wire hanger for positioning, and phantom power adapter. 9 – 52 V phantom required.
What's in the box?
- 1x ADX40 Miniature Overhead Condenser Microphone
- 1x APS910 Cylindrical Preamplifier
- 1x HANGER40 Wire Hanger
- 1x P1 Carrying Pouch
- 1x 30? Attached Shielded Cable
- 1x WS20 External Windscreen
| Transducer Type | Condenser |
|---|---|
| Frequency Response | 40 Hz – 20 kHz |
| Polar Pattern | Cardioid Hypercardioid (ADX40HC) |
| Output Impedance | 250 ohms balanced |
| Sensitivity | 5 mV / Pa @ 1k |
| Equivalent Noise Level | 29 dB (A weighted) |
| Signal to Noise Ratio | 65 dB |
| Maximum SPL | ≥130 dB |
| Power Requirements | 9 – 52 Volts phantom |
| Cable/Connector | Shielded 30’ terminating to a miniature 3 pin Female XLR connector |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 |
| Materials / Finish | Brass / Black E-Coat |
| Weight | 110 g / 4 oz |
| Length | 30 mm / 1.2 in |
