Product Information

The XL1 is a two-way, high efficiency, powered line array loudspeaker. It is designed as an ultra compact high performance system for the reproduction of speech and music program material. The XL1 incorporates a large format 1.4" exit compression driver coupled to a stabilized proprietary FlatWave Former that delivers clear but penetrating high frequencies over a predictable and controlled coverage area. Dual 8" cone transducers coupled to the (A.I.M.) Acoustic Intergrading Module minimizing cone filtering throughout the entire operating range.

A sturdy multi-ply plywood enclosure, with a multi-layered catalyzed polyurethane finish, will withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The custom designed flyware enables the user to easily array the system to the procise desired coverage area. The XL1 is available in black or white color. The XL1 excels in a myriad of diverse applications requiring a compact line array enclosure. Superior workmanship and transparent sonic quality make the XL1 an exceptional tool for any speaker system.


System Performance  
Frequency Response (-3dB)* 65 Hz – 18 kHz
Frequency Range (-10dB) 50 Hz – 20 kHz
Recommended High-Pass 60 Hz – with minimum 24 dB / octave (4th order) Butterworth slope
Nominal directivity (-6dB) Horizontal: 160 Degrees
Vertical: Dependent upon number of elements and line source curvature
Recommended Crossover Frequency 1.2k Hz (acoustic, active, external DSP)
RMS handling capacity**  LF: 400 W
HF: 150 W
Maximum SPL @ 1 Meter*** 132 dB ([WorxAudio] preset)
Components LF: 8” (203.2mm) x 2, 2” (50.8) voice coil
  HF: 1.4” Exit (35.56mm) x 1, 3” (76.2) voice coil
Nominal Impedance LF = 4 ohms, HF = 8 ohms, BiAmped
  LF = 4 ohms, HF = 8 ohms, Self Powered
Enclosure Baltic birch plywood, engineered plastics, and aluminum frame
Finish Two-part spray catalyzed Polyurea coating on plywood
Grill 14-gauge (1.0 mm) perforated steel, powder-coated finish, black
Environmental Indoor use only
Connectors Two (2) parallel-wired NL4 Neutrik® Speakon® connectors
Power Amp Connectors Neutrik® powerCON (AC) XLR M/F (In/Out) or DANTE
Suspension/Mounting TrueAim® Tour side rigging; optional array frame accessories
Dimensions 10.25” H x 24.5” W x 18” D (260.35 mm x 622.3 mm x 457.2 mm)
Net Weight 64 lb. (29.02 kg)
Shipping Weight 70 lb. (31.75 kg) - approximate with carton
Product Versions XL1i-BiAmp-Powered, XL1T-BiAmp-Powered
Digital Power Amp 500W (x1) LF, 500W (x1) HF
Digital program processing
XLR I/O-DANTE enabled
AC powerCON I/O
* Frequency response and range measured on-axis with anechoic environment.
** Power handling tested using pink noise filtered to meet IEC 268-5, 6 dB crest factor, 100 hours, with recommended EQ.
*** Peak level measured at 1m under free field conditions using 10 dB crest factor pink noise with specified ([WorxAudio] preset) and corresponding EQ settings.
Current Stock:
Weight 13.6 kg
Weight: 29.00 KGS
Width: 62.20
Height: 26.03
Depth: 45.70

Customer Reviews (0 Reviews) Write a review of this product